Page Comparison

Introduction

This guide is designed to provide clear, step-by-step instructions for successfully connecting your Poly Sync Speakers to any Bluetooth-enabled device. Our easy-to-follow guide will ensure a seamless pairing experience.

Instructions

First, the physical button labeled “Speaker Sync” on the side of each speaker must be held for 2 seconds. Start with the one closest to the computer, once you get a response from the speaker that it is pairing, then move on to the second speaker quickly and hold the button down. You should then get a confirmation that the speakers are paired

with each other.

Image Added

Image Added

After that, ensure that Bluetooth is turned on on your selected device. The device shown is a standard issue FCDC Laptop running Windows 10.

Open your settings

Image Added

Type in “Bluetooth” and select the first option

Image Added

Ensure that Bluetooth is turned on, and then select “Add Bluetooth or other device”

Image Added

Once you’ve done this, press and hold the Bluetooth logo on the speaker closest to the computer, this should allow the speaker to show up in the list of available devices on the computer.

Image Added

Once it shows up on the list of available devices, select it and connect. It should then allow the speakers to be used as both speakers and a microphone array. Then just open desired meeting app, set as communication device in that app, and test accordingly.